SC Fast Connector
1. Field assemble; Use few tool; Easy to operate; Only need less than one minute for installation.
2. The whole progress can be visualized. Optic fiber run in controlled range. Successful rate can reach the limit value 100%.
3. Can make the patch cord at any length on site, and no need to adhesive and Polish.
4. No need to hot melt and save the power supplies. With excellent optical properties. Sufficiently tolerant the low temperature, high temperature, moist heat, salt fog, and also endures the test for vibration, drop, and mechanical durability.Can be dropped from 3-5 m high. The index is stable after repeated 3 times.
DATA SHEET
|
ITEM |
Technical Parameters |
|
Applicable for |
Drop cable.Indoor cable |
|
Optical fiber diameter |
125μm ( 657A & 657B ) |
|
Tight buffer diameter |
250μm |
|
Fiber mode |
Single mode |
|
Operation time |
About 100s(no fiber cut) |
|
Insert loss |
≤ 0.3dB(1310nm & 1550nm) |
|
Return loss |
>40dB |
|
Fastening strength of naked fiber |
>5 N |
|
Fastening strength of naked fiber holder |
>10 N |
|
Tensile strength |
>50 N |
|
Using temperature |
-40~+75°C |
|
On-line tensile strength (20 N) |
IL ≤ 0.3dB |
|
Mechanical durability (500 times) |
IL ≤ 0.3dB |
|
Drop-off test (drop-off height 4m, once per direction, totally 3 times) |
IL ≤ 0.3dB |
P/N:FOCN-SC/PC-FAST
