Splice Protection Sleeve
SPECIFICATIONS:
1.Protective sleeve length:40mm,45mm,60mm
2.Single fiber
3.Single stainless steel reinforcing bar
DESCRIPTIONS:
Splice Protection Sleeve is used for protectiong and supporting the fusion splice point.Single fiber to maximum 12 fibers protection sleeves are available from us.The outer jacket of the sleeve is made of PE while the inner tube is made of EVA.The minimum shrinking temperature is 100’c.
FEATURES:
Consist of cross-linked PE,hot fusion tubing and stainless reinforced steel rod
Keep optical transimission performance of optical fiber
Provide safe protection to optical fiber splicing
Easily use and avoide any damage to the optical fiber during installation
Sealing structure provides good performance to the splicing in the environment with temperature and humidity
Optic fiber protection sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing.
The sleeve can be divided into two types(single and mass) according to the function.The single type is used for the single-fiber,and the mass type is used for the ribbon fiber.It is different in the reinforcement between two types.The single one realizes the reinforcement by the stainless steel needles,the later one via the ceramic reinforcement member to realize the funtion.
Mass means there are several cores for the fiber.So the mass sleeve includes 4cores,6cores,8cores,12cores etc.
JKY can supply below size fusion splice protection sleeve.If you have any other special enquiry,pls contact our salemen.
1.Standard type fusion splice protection sleeve:
|
Specification |
Length of sleeve(L) |
Hot melting tube(D) |
Steel Pin( d ) |
Packing |
|||
|
Length of after shrinking(mm) |
Length (mm) |
ID(mm) |
Height (mm) |
ID(mm) |
Length (mm) |
||
|
1.2×60mm |
3.3 |
60 |
1.4 |
60 |
1.2 |
55 |
100pcs/bag |
|
1.2×45mm |
3.3 |
45 |
1.4 |
45 |
1.2 |
40 |
100pcs/bag |
|
1.2×40mm |
3.3 |
40 |
1.4 |
40 |
1.2 |
35 |
100pcs/bag |
|
1.2×30mm |
3.3 |
30 |
1.4 |
30 |
1.2 |
26 |
100pcs/bag |
|
1.2×25mm |
3.2 |
25 |
1.3 |
25 |
1.2 |
21 |
100pcs/bag |
|
1.0×60mm |
2.0 |
60 |
0.5 |
60 |
1.0 |
56 |
100pcs/bag |
|
1.0×40mm |
2.0 |
40 |
0.5 |
40 |
1.0 |
35 |
100pcs/bag |
2.Large size fusion splice protection sleeve:
|
Specification |
Length of sleeve(L) |
Hot melting tube(D) |
Steel Pin( d ) |
Packing |
|||
|
Length of after shrinking(mm) |
Length (mm) |
ID(mm) |
Height(mm) |
ID(mm) |
Length(mm) |
||
|
1.5×60mm |
4.2 |
60 |
1.7 |
60 |
1.5 |
55 |
100pcs/bag |
|
1.5×45mm |
4.2 |
45 |
1.7 |
45 |
1.5 |
40 |
100pcs/bag |
|
1.5×40mm |
4.2 |
40 |
1.7 |
40 |
1.5 |
35 |
100pcs/bag |
|
1.5×21mm |
4.2 |
25 |
1.7 |
25 |
1.5 |
21 |
100pcs/bag |
P/N:SPS-40mm
P/N:SPS-45mm
P/N:SPS-60mm (pls contact salesman for specific Part Nomber.)
